Hioki-U8794 VIR GENERATOR UNIT
Generation unit can be used for various simulation tests instead of sensor output
Key Features and Functions
- As an inspection device of the ECU, it is ideal for generating simulation signals of various sensors, inspection of electronic parts, equipment maintenance
- DC voltage, DC current, and resistance simulation output
- In resistance generation, the voltage to be connected is measured, the output current is calculated from the set resistance value, and simulated output
- Used in combination with Memory HiCorder series MR8740T (not available in other models)
- Isolation between each output channel and between channel and chassis
Stock
Call or email for delivery time
As an inspection device of the ECU, it is ideal for generating simulation signals of various sensors, inspection of electronic parts, equipment maintenance
Basic specifications
- Output terminal:
- Number of channels: 8 (each channel is isolated), Connector: 25-pin D-sub
- Max. rated voltage to earth: 25 V
- Output items: DC voltage, DC current, resistance (simulated output)
- Output range:
- DC voltage: -0.100 0 V to +5.300 0 V (setting resolution: 0.1 mV)
- DC current:
- 5 mA range: -5.000 0 mA to +5.000 0 mA, Setting resolution: 0.1 μA
- 1 mA range: -1.000 00 mA to +1.000 00 mA, Setting resolution: 0.01 μA
- 250 μA range: -250. 00 μA to +250.00 μA, Setting resolution: 0.01 μA
- 50 μA range: -50. 000 μA to +50. 000 μA, Setting resolution: 0.001 μA
- Resistance: 10 Ω to 1 MΩ, Setting resolution: 6 digits
- Output accuracy:
- DC voltage: 5 V range, ±0.035% of setting ± 800 μV
- DC current:
- 5 mA range: ±0.050% of setting ± 4.0 μA
- 1 mA range: ±0.050% of setting ± 800 nA
- 250 μA range: ±0.050% of setting ± 200 nA
- 50 μA range: ±0.050% of setting ± 40 nA
- Other: Self diagnostic, switch output terminals, estimate target connection, cancel offset
Description
Additional Informations
Reviews
Query on the Item
Do you have any questions on this item?
Description
Reviews
Query on the Item
As an inspection device of the ECU, it is ideal for generating simulation signals of various sensors, inspection of electronic parts, equipment maintenance
Basic specifications
- Output terminal:
- Number of channels: 8 (each channel is isolated), Connector: 25-pin D-sub
- Max. rated voltage to earth: 25 V
- Output items: DC voltage, DC current, resistance (simulated output)
- Output range:
- DC voltage: -0.100 0 V to +5.300 0 V (setting resolution: 0.1 mV)
- DC current:
- 5 mA range: -5.000 0 mA to +5.000 0 mA, Setting resolution: 0.1 μA
- 1 mA range: -1.000 00 mA to +1.000 00 mA, Setting resolution: 0.01 μA
- 250 μA range: -250. 00 μA to +250.00 μA, Setting resolution: 0.01 μA
- 50 μA range: -50. 000 μA to +50. 000 μA, Setting resolution: 0.001 μA
- Resistance: 10 Ω to 1 MΩ, Setting resolution: 6 digits
- Output accuracy:
- DC voltage: 5 V range, ±0.035% of setting ± 800 μV
- DC current:
- 5 mA range: ±0.050% of setting ± 4.0 μA
- 1 mA range: ±0.050% of setting ± 800 nA
- 250 μA range: ±0.050% of setting ± 200 nA
- 50 μA range: ±0.050% of setting ± 40 nA
- Other: Self diagnostic, switch output terminals, estimate target connection, cancel offset
Do you have any questions on this item?