Raditeq CTR1004B#020 RadiCentre with GPIB, 2 Slots
CTR1004B Dual Slot Modular EMC Test System + GPIB Input
The standard modular test system of the RadiCentre® series. With two available slots for Raditeq plug-in cards the RadiCentre® can be used to make integrated EMC systems. In combination with RadiMation® the EMC engineer can create a fully automated EMC setup and effortlessly perform EMC tests and measurements.
Specifications
- Number of Slots : 2
- Model type : Desktop or 19″ rack mountable
- Interface : USB, LAN and IEEE-488
- Cables inputs : USB cable, IEC power cord
- Interlock system : 6,35mm jack plug connection to safety system disables Interlock & Interlocked laser outputs when triggered.
Standard delivered including
RadiCentre + GPIB Including
- PRO2001A – ARM Processor plug-in card – USB | LAN
- PSU1250A – Power supply plug-in card – 250W
- AC/DC Power Cable
- USB Connection Cable
Upgrade options
All Raditeq Plug-in Cards, some examples:
- RadiSense The LASER powered range of EM Field Sensors (range up to 40GHz)
- RadiField Integrated EMC Immunity Test Solution 1 to 18 GHz
- RadiPower The range of power meters up to 18 GHz for EMC applications
- RadiGen The range of RF signal generators up to 6 GHz for EMC applications
- RadiSwitch To switch one, two, four or six RF signals up to 40 GHz
RadiCentre® The Heart of each EMC Test System
EMC test systems can vary from simple systems with one or two instruments to complex installations with many measurement instruments connected. In order to enable effective fully automated testing, these devices and measuring instruments, as well as the connection as made between amplifiers, power meters, antennas and measurement receivers, should be controlled in an automated manner. Where RadiMation® acts as the brain of the system; the RadiCentre® heart of the system.
Flexible to cover both single instrument applications as well as small or large EMC test systems the RadiCentre® mainframe is available as an one-slot (CTR1001S), four-slot (CTR1004B) or nine-slot versions (CTR1009B). Each slot can be configured at the user’s choice with different plug-in cards, allowing any combination of cards.
Extensible The RadiCentre can be extended with a wide array of available plug-in cards.
- RadiSense® The range of LASER powered E-Field Sensor
- RadiField® Integrated EMC Immunity Test Solution
- RadiPower® The range of RF power meters for EMC application
- RadiGen® The range of RF signal generators
- RadiSwitch® To switch one, two, four or six RF signal
- RadiControl® Antenna Tower/Positioner and Turntable controller
RadiCentre® The Heart of each EMC Test System
EMC test systems can vary from simple systems with one or two instruments to complex installations with many measurement instruments connected. In order to enable effective fully automated testing, these devices and measuring instruments, as well as the connection as made between amplifiers, power meters, antennas and measurement receivers, should be controlled in an automated manner. Where RadiMation® acts as the brain of the system; the RadiCentre® heart of the system.
Flexible to cover both single instrument applications as well as small or large EMC test systems the RadiCentre® mainframe is available as an one-slot (CTR1001S), four-slot (CTR1004B) or nine-slot versions (CTR1009B). Each slot can be configured at the user’s choice with different plug-in cards, allowing any combination of cards.
Extensible The RadiCentre can be extended with a wide array of available plug-in cards.
- RadiSense® The range of LASER powered E-Field Sensor
- RadiField® Integrated EMC Immunity Test Solution
- RadiPower® The range of RF power meters for EMC application
- RadiGen® The range of RF signal generators
- RadiSwitch® To switch one, two, four or six RF signal
- RadiControl® Antenna Tower/Positioner and Turntable controller