ITECH IT-M3132D Dual-channel DC Power Supply (2 x 60 V, 10 A, 200 W)
DC Output and Load Ratings:
- Two independent channels
- Maximum 2 x 200 W
- Maximum Output voltage: 2 x 0-60 V
- Current: 2 x 0-10 A
- Two channels can be connected in series or parallel to extend current and voltage
DC Output Modes:
- CV, CC, Battery Charging, LiST mode
Feature set:
- 1U Half-Rack only Isolated dual-channel design
- Timing output of each channel, synchronous or delayed output, output with different voltage ratios
- Adjustable rising/falling speed of output current
- Up to 100 steps LIST operation, support output of various dynamic waveforms
- Support CC/CV loop speed and priority setting
- Independent control of multi channels, one communication card can control up to 16 channels
- Support TRACE function, can draw voltage and current waveforms in real time ( Supported by PC software)
- Battery charging test function
- Constant Power support
- Software watchdog provides more reliable and safe automatic battery test solution
- Various protection functions such as OVP, ±OCP, ±OPP, OTP, ensure secure testing
- Provide self-locking function. When the device is locked, the device will not output voltage
Connectivity:
- Support CANOPEN, LXI, SCPI and other communication protocols
- Five optional cards for plug-and-play function, providing RS232, CAN, LAN, GPIB, USB_TMC, USB_VCP, RS485
- External analog and IO communication interfaces
Documents and Software Solutions:
IT-M3100D dual-channel programmable DC power supply, only 1U half rack, provides fully isolated dual-channel output. The automatic wide-range
design can provide you with higher voltage and current output, so one unit can cover a wide range of applications. Its flexible modular design, independent
multi-channel design and simultaneous operation function allow you to configure each channel freely. IT-3100D dual-channel programmable DC
power supply is especially suitable for production line aging test and building automated test system. At the same time, it can also be used in
experiments and evaluation, quality management and many other applications.
Multi-channel independent control
The IT-M3100D dual-channel DC power supply adopts an independent multi-channel design, which makes it easy to connect between the power
supply and the computer. When a multi-channel power supply system is formed, the channel number will be displayed on the interface of each
power supply. If the communication interface of one of the units is connected to the computer, you can independently control each power supply in
the system by software. Each channel can be operated independently. A 37U cabinet can include up to 40 units/80 channels, which greatly
increases the utilization rate of the equipment.
Synchronism (Link)
IT-M3100D supports synchronization function whether it is a single unit or in a multi-channel power supply system. It is suitable for the simultaneous
testing of multiple DUTs, or the application scenarios where the DUT is multi-channel power input. There are three synchronization modes for
you, On/Off, Track, Duplicate. You just need to configure parameters on one power supply, and the parameters can be automatically replicated or
synced proportionally to other power supplies in the loop.
When the ON/OFF function is used with the ON/OFF delay function in the menu, synchronous power-on or sequential power-on can be realized.
IT-M3100D dual-channel programmable DC power supply, only 1U half rack, provides fully isolated dual-channel output. The automatic wide-range
design can provide you with higher voltage and current output, so one unit can cover a wide range of applications. Its flexible modular design, independent
multi-channel design and simultaneous operation function allow you to configure each channel freely. IT-3100D dual-channel programmable DC
power supply is especially suitable for production line aging test and building automated test system. At the same time, it can also be used in
experiments and evaluation, quality management and many other applications.
Multi-channel independent control
The IT-M3100D dual-channel DC power supply adopts an independent multi-channel design, which makes it easy to connect between the power
supply and the computer. When a multi-channel power supply system is formed, the channel number will be displayed on the interface of each
power supply. If the communication interface of one of the units is connected to the computer, you can independently control each power supply in
the system by software. Each channel can be operated independently. A 37U cabinet can include up to 40 units/80 channels, which greatly
increases the utilization rate of the equipment.
Synchronism (Link)
IT-M3100D supports synchronization function whether it is a single unit or in a multi-channel power supply system. It is suitable for the simultaneous
testing of multiple DUTs, or the application scenarios where the DUT is multi-channel power input. There are three synchronization modes for
you, On/Off, Track, Duplicate. You just need to configure parameters on one power supply, and the parameters can be automatically replicated or
synced proportionally to other power supplies in the loop.
When the ON/OFF function is used with the ON/OFF delay function in the menu, synchronous power-on or sequential power-on can be realized.