Hioki-BT3554-92 BATTERY TESTER, with angled pin type lead L2020, bundled withZ3210 wireless dongle

Hioki portable battery testers support the maintenance of UPS and storage batteries critical to the life support of all businesses. The BT3554-50 battery internal resistance tester sets the standard for assessing the deterioration and remaining life of UPS and other lead-acid batteries by giving a complete diagnosis via battery resistance testing. The specially designed L2020 Pin Type Lead further improves testing efficiency with an L-shaped tip that lets you reach deep into the battery racks to completely probe the terminals.

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

• Resistance measurement range: 3 mΩ (max. display 3.100 mΩ, resolution 1 μΩ) to 3 Ω (max. display 3.100 Ω, resolution 1 mΩ), 4 ranges
• Accuracy: ±0.8 % rdg ±6 dgt (3 mΩ range: ±1.0 % rdg ±8 dgt)
• Testing source frequency: 1 kHz ±30 Hz
• With function for avoiding noise frequency enabled: 1 kHz ±80 Hz
• Testing current: 160 mA (3m/30 mΩ range), 16 mA (300 mΩ range), 1.6 mA (3 Ω range)
• Open terminal Voltage: 5 V peak
• Voltage measurement range: ± 6 V (max. display ±6.000 V, resolution: 1 mV) to ± 60 V (max. display ±60.00 V, resolution: 10 mV), 2 ranges, Accuracy: ±0.08 % rdg ±6 dgt
• Temperature measurement accuracy:
• Measurement range: -10°C to 60°C (14°F to 140°F), Maximum display: 60.0°C (140.0°F), Resolution 0.1°C (0.1°F), Measurement accuracy*: ±1.0°C (±1.8°F)
• * When using the Clip Type Lead with Temperature Sensor 9460.
• * When using the Temperature Probe 9451, add ±0.5°C (±0.9°F) (cable length: 1.5 m [59.1']).
• * When using the Temperature Probe 9451S, add ±0.5°C (±0.9°F) (cable length: 0.1 m [3.94']).
• BT3554-50 standalone accuracy with simulated input: ±0.5°C (±0.9°F)
• Absolute max. input voltage: 60 V DC max. (No AC input)
• Measurement time: 100 ms
• Response time: Approx. 1.6 sec.
• Comparator:
• Compares measured values with set threshold values to make judgments and reports them to the user.
• Judgment notification method: Results are displayed as shown below (segment) and beeping tones sound
• When the Voltage value (high): Resistance value (low)= PASS, Resistance value (medium)= WARNING, Resistance value (high)= FAIL
• When the Voltage value (low): Resistance value (low)= WARNING, Resistance value (medium)= WARNING, Resistance value (high)= FAIL
• If the judgment result is WARNING or FAIL, the audio tone is accompanied by a red backlight.
• User-selectable voltage judgment method: ABS (absolute value judgment), POL (polarity judgment )
• Savable settings: 200 tables
• Memory functionality:
• Operation: Save, load, and delete measurement data, Save and delete profile information, Number of data sets: 6000, Memory architecture: 500 data sets per unit (12 units)
• Saved data: Saved measurement data is linked to profile information. 
• Measurement data: Data can be saved, loaded, and deleted by operating the instrument.
• -1. Date and time
• -2. Resistance value, voltage value, and temperature
• -3. Comparator threshold value and judgment result 
• Profile information: Profile information can be saved, loaded, and deleted using a supported application (GENNECT Cross or GENNECT One).
• -1. Profile numbers: 1 to 100 (Data (2), (3), and (4) below are saved for each profile number)
• -2. Location: User-defined comment such as location of UPS
• -3. Device information: User-defined comment such as UPS management number
• -4. Battery number: 1 to 500 (start number, end number)
• Measurement Navigator:
• Operation: Announces the next battery number to be measured via a screen display and audio guidance.
• Audio output is generated by a connected mobile device when using the Z3210 and a supported application (GENNECT Cross).
• Preparations: Profile information that's been registered with a supported application (GENNECT Cross or GENNECT One) must be transferred to the instrument.
• Communication interface: USB
• Bluetooth® wireless communications (when Z3210 installed)
• Other functions: Temperature measurement (-10.0 to 60.0 °C), Zero-adjustment, Hold, Auto-hold, Auto-memory, Auto-power-save, Clock
• Power supply:
• LR6 (AA) Alkaline dry battery ×8
• Continuous operating time: About 8.3 hr. (without Z3210 installed), About 8.2 hr. (with Z3210 installed and wireless communications active)
• Dimensions and mass:
• 199 mm (7.83 in)W × 132 mm (5.20 in)H × 60.6 mm (2.39 in)D (with protector), 960 g (33.9 oz) (including batteries and protector)
• Accessories:
• Carrying Case C1014 ×1, Protector Z5041 ×1, Fuse Set Z5050 ×1, 0 Adj Board ×1, Neck strap ×1, USB cable ×1, Application software CD (GENNECT One) ×1, AA alkaline battery (LR6) ×8, User Manual ×1

• PDF
• Compare this item

Hioki portable battery testers support the maintenance of UPS and storage batteries critical to the life support of all businesses. The BT3554-50 battery internal resistance tester sets the standard for assessing the deterioration and remaining life of UPS and other lead-acid batteries by giving a complete diagnosis via battery resistance testing. The specially designed L2020 Pin Type Lead further improves testing efficiency with an L-shaped tip that lets you reach deep into the battery racks to completely probe the terminals.

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

• Resistance measurement range: 3 mΩ (max. display 3.100 mΩ, resolution 1 μΩ) to 3 Ω (max. display 3.100 Ω, resolution 1 mΩ), 4 ranges
• Accuracy: ±0.8 % rdg ±6 dgt (3 mΩ range: ±1.0 % rdg ±8 dgt)
• Testing source frequency: 1 kHz ±30 Hz
• With function for avoiding noise frequency enabled: 1 kHz ±80 Hz
• Testing current: 160 mA (3m/30 mΩ range), 16 mA (300 mΩ range), 1.6 mA (3 Ω range)
• Open terminal Voltage: 5 V peak
• Voltage measurement range: ± 6 V (max. display ±6.000 V, resolution: 1 mV) to ± 60 V (max. display ±60.00 V, resolution: 10 mV), 2 ranges, Accuracy: ±0.08 % rdg ±6 dgt
• Temperature measurement accuracy:
• Measurement range: -10°C to 60°C (14°F to 140°F), Maximum display: 60.0°C (140.0°F), Resolution 0.1°C (0.1°F), Measurement accuracy*: ±1.0°C (±1.8°F)
• * When using the Clip Type Lead with Temperature Sensor 9460.
• * When using the Temperature Probe 9451, add ±0.5°C (±0.9°F) (cable length: 1.5 m [59.1']).
• * When using the Temperature Probe 9451S, add ±0.5°C (±0.9°F) (cable length: 0.1 m [3.94']).
• BT3554-50 standalone accuracy with simulated input: ±0.5°C (±0.9°F)
• Absolute max. input voltage: 60 V DC max. (No AC input)
• Measurement time: 100 ms
• Response time: Approx. 1.6 sec.
• Comparator:
• Compares measured values with set threshold values to make judgments and reports them to the user.
• Judgment notification method: Results are displayed as shown below (segment) and beeping tones sound
• When the Voltage value (high): Resistance value (low)= PASS, Resistance value (medium)= WARNING, Resistance value (high)= FAIL
• When the Voltage value (low): Resistance value (low)= WARNING, Resistance value (medium)= WARNING, Resistance value (high)= FAIL
• If the judgment result is WARNING or FAIL, the audio tone is accompanied by a red backlight.
• User-selectable voltage judgment method: ABS (absolute value judgment), POL (polarity judgment )
• Savable settings: 200 tables
• Memory functionality:
• Operation: Save, load, and delete measurement data, Save and delete profile information, Number of data sets: 6000, Memory architecture: 500 data sets per unit (12 units)
• Saved data: Saved measurement data is linked to profile information. 
• Measurement data: Data can be saved, loaded, and deleted by operating the instrument.
• -1. Date and time
• -2. Resistance value, voltage value, and temperature
• -3. Comparator threshold value and judgment result 
• Profile information: Profile information can be saved, loaded, and deleted using a supported application (GENNECT Cross or GENNECT One).
• -1. Profile numbers: 1 to 100 (Data (2), (3), and (4) below are saved for each profile number)
• -2. Location: User-defined comment such as location of UPS
• -3. Device information: User-defined comment such as UPS management number
• -4. Battery number: 1 to 500 (start number, end number)
• Measurement Navigator:
• Operation: Announces the next battery number to be measured via a screen display and audio guidance.
• Audio output is generated by a connected mobile device when using the Z3210 and a supported application (GENNECT Cross).
• Preparations: Profile information that's been registered with a supported application (GENNECT Cross or GENNECT One) must be transferred to the instrument.
• Communication interface: USB
• Bluetooth® wireless communications (when Z3210 installed)
• Other functions: Temperature measurement (-10.0 to 60.0 °C), Zero-adjustment, Hold, Auto-hold, Auto-memory, Auto-power-save, Clock
• Power supply:
• LR6 (AA) Alkaline dry battery ×8
• Continuous operating time: About 8.3 hr. (without Z3210 installed), About 8.2 hr. (with Z3210 installed and wireless communications active)
• Dimensions and mass:
• 199 mm (7.83 in)W × 132 mm (5.20 in)H × 60.6 mm (2.39 in)D (with protector), 960 g (33.9 oz) (including batteries and protector)
• Accessories:
• Carrying Case C1014 ×1, Protector Z5041 ×1, Fuse Set Z5050 ×1, 0 Adj Board ×1, Neck strap ×1, USB cable ×1, Application software CD (GENNECT One) ×1, AA alkaline battery (LR6) ×8, User Manual ×1

• PDF
• Compare this item